2 way open baffle satellites and open baffle woofer.
Amplifiers
1 x 280 watts/ch (1000 watts peak) stereo amplifier (for mid units)
1 x 280 watts (1000 watts peak) mono amplifier (for the bass module)
1 x 100 watts/ch (300 watts peak) stereo amplifier (for tweeter units)
Digital Signal Processor / Electronic Crossover
Analog Devices SHARC DSP: S/N in excess of 120 dBA - Up to 768 Khz sampling rate
AKM AK4495 DACs : 123 dBA dynamic range
AKM AK5397 ADCs : 127 dBA dynamic range
Inputs
System | 2 way active |
Price | € 1200 (Pair) |
Drivers | woofer:135 mm AS cone tweeter: JET III (Air Motion Transformer) |
Frequency Response | 38-50.000 Hz (IEC 268-5) |
Cabinet | Bass reflex |
Digital input | 1 × Digital S/PDIF (RCA) |
Analogue input | 1 × Line-channel (RCA) 1 × Balanced |
Amp | Tweeter: 28 W Woofer: 50 W |
Crossover | - |
Coaxial active monitor
System | 2 way active |
Price | $2499 CND (piece) |
Drivers | Coaxial 10 inch woofer 1,4 inch titanium dome tweeter |
Frequency Response | 35 Hz to 20 000Hz (extended LF), 45 Hz to 20 000Hz (normal), 55 Hz to 20 000Hz (restricted LF) ±2dB on-axis, anechoic |
Cabinet | Bass reflex, dual port |
Digital input | N/A |
Analogue input | XLR |
Amp | 2x 170 W Class D |
Crossover | DSP: 96 kHz, 24 bit AD / DA conversion, 28 x 28 bit multiplier with 56 bit accumulator, double precision processing. Crossover at 2,5 kHz |
What sets it apart is that there is no analog input.
It uses a wireless connection to get the data from a PC or a iSomthing using a dongle.
Elipson calls it WELL. Wireless Elipson Lossless Link, the internet says it is based on KLEER technology so lossless audio up to 16 bit/44.1 kHz over a 2.4GHz radio link.
2-way active speaker with coaxial driver
2 x 50 W / 4 ohms ICEpower amplifier
Mid-bass driver: 6.5 " (165 mm)
Fabric dome tweeter
Frequency response: 42 Hz - 20 kHz
Sensitivity: 90 dB/1 W/1 m
A review by AVforums
System | 2-Way |
Price | $15,000 |
Cabinet | Open baffle dipole speaker below 750Hz, Monopole above 750Hz |
Digital input | n/a |
Analogue input | binding post |
Amp | your own |
Crossover | Behringer DCX2496 Analog input or AES digital input CRYSTAL®/AKM® A/D & D/A converter |
A semi active speaker as is comes without the amps.
The Behringer connects to a PC for easy configuration.
System | 2 way active |
Cabinet | Vented |
Price | € 296 (piece, ex VAT) |
Woofer: | 4" |
Tweeter: | AMT-RS1 |
Frequency Response | 64Hz - 21kHz |
Amp | 2x 50 Watt |
Max SPL: | 96 dB |
Size | 145x230x195 mm |
Weight | 3.8 kg |
Crossover | DSP 3000 Hz |