Active speakers

Manger MSM C1



2 way active

Price € 7413,70 (pair)


495 x 270 x 424mm

30 kg

Digital input


Analogue input XLR
Frequency Range 30Hz - 40kHz

HF: Manger Sound Transducer, bandwidth 80 - 40kHz, risetime 13µs

LF: 200mm fibreglass-Polyester sandwich cone, 38mm voice-coil


LF: 250W at 8Ohms, 400W at 4Ohms (with optional LF-Module)
HF:180W at 8Ohms


Frequency: 330Hz


Manger MSM S1


Type Active 2-Way System
Price from € 13200,- per pair incl. 19% VAT
Cabinet Sealed enclosure
Dimensions (H x W x D) 44.8" x 10.6" x 8.4" (1139 x 270 x 214 mm)
Weight 105.7 lbs (48 kg)
Frequency 30 Hz – 40 kHz


Tweeter: Manger Sound Transducer, Bandwidth 80 Hz – 40 kHz, Rise Time 13μs

Woofer: 8"(200 mm) fibreglass-Polyester sandwich cone, 38 mm voice-coil

Crossover 330 Hz
Amplifiers LF: 250 W @ 8 Ohms
HF: 180 W @ 8 Ohms
Power Bandwidth HF: 250 kHz (-3 dB)
Input XLR-3 (balanced)
Finish Silk matt as per RAL, Nextel or piano finish

Mark & Daniel Maximus-Opal-air4 $1,500.00 (piece)


Active speaker with Nuforce Air dac for wireless operation.


Power Consumption:    65 Watts 
Frequency Response:   48Hz-35KHz 
Two-way Crossover:     950Hz 
Enclosure Material:       CAM Solid Surfacing 
Enclosure Size:             H29.0 x W18.0 xD22.0 cm / H11.5” xW7.1” xD8.4” 
Weight (each):             10 Kg (22 lb) 


Added 2015

Meridian DSP3200

Also pictured Audio Core 200 pre-amp.



2-way sealed enclosure system

Price $6,000/pair
Frequency within 3dB from 45Hz to over 20kHz
  • 1 x 165mm polypropylene bass driver.
  • 1 x 85mm aluminium cone wide-range driver.
Noise less than 15dB spl.
Digital input

Meridian SpeakerLink in and out

Analogue input n.a.
  • Two 75W power amplifiers, one for each driver.
  • Overall distortion typically <0.02% at any frequency or level.
DSP Crossover, loudness
Remote Wireless using the
Sooloos application on an iPad, iPhone, or iPod Touch, or the
Control:PC/Control:Mac application on a computer.

Meridian M6


• Frequency response in-room within 3dB from 38Hz to over 20kHz.
• Output 106dB spl @ 1m on music material.
• Noise less than 15dB spl.
Connections: Meridian SpeakerLink in and out (RJ45)
Construction: 2-way bass reflex system
• Bass: 1x 140mm aluminium cone
• Wide-range: 1x 85mm aluminium cone
• Bass: 150W Class D with feedback, bridge-tied load
• Wide-range: 100W super-linear low-feedback
• Overall distortion typically <0.02% at any frequency or level.
• Height: 921mm (36.26in) on rubber Bumpons
• Diameter: 300mm (11.8in) at base, 66mm (2.60in) at top
Weight: 18kg (39.6lb)

Price: $9.000/pr


Meridian DSP 5200


'2 1/2-way' active

Price £ 13990 (pair)

"2 1/2-way" acoustic reflex system.


Digital input

S/PDIF digital input, 32kHz–96kHz sampling rates at up to 24 bit

Analogue input N/A

Three 75W power amplifiers, one for each driver


150MIPS digital signal processor.

Digital crossover at 2.6kHz.

Response correction for the whole system. Bass protection.

User tone controls.

Analogue/digital volume and phase control.

Monkey Banana Turbo 8


'2-way' active

Price € 399,- each


Digital input


HF driver 1-inch natural silk dome
LF Driver 8-inch ceramic cone
Analogue input XLR/TRS Combo connectors,

30/80 Watt A/B

DSP built-in DAC


Monitor Audio WS100 $399.00

Wireless active desktop speaker



Frequency Response: 80Hz - 25kHz
Maximum SPL (each @ 1M): 99.5dBA
Power output (RMS):

Bass 2 x 20 watts
Tweeter 2 x 10 watts 

Drive unit complement:

2 x 75mm (3") C-CAM Cone Bass Driver
2 x 19mm (3/4") C-CAM Gold Dome Tweeter 

System configuration: Sealed box
Auxiliary input impedeance/sensitivity: 10k ohms/300mV
Wireless system: SKAAtm 2.4GHz
Wireless range: Up to 10 metres
Signal to noise SNR: >95dB
A.C. input voltage: 90-264V (auto range)
Amplifier category: Class D - high resolution amplifiers
Power consumption: <0.5 watts (standby); 14.5 watts (Max)
Electrical approvals: ErP, CE, CB, cTUVus, FCC, IC, GOST
Dimensions (each) (H x W x D): 125 x 120 x 120mm (415/17 x 43/4 x 43/4")
Colour/Finish: Silver cabinet with black glass top and black grille
Weight (each) 1.8kg (4lb)

Morgan Audio rms11

£ 499.00 (£ 415.83 excl VAT) pair


  • Dimensions: 167mm(W) x 282mm(H) x 180mm(D)
  • Woofer: 4"coated paper cone, elastic rubber surround and 20mm voice-coil.
  • Tweeter: magnetically shielded 1" fabric dome, ferro-fluid cooled voice coil.
  • Amplifiers: Bass 30w, treble 25w
  • Frequency Response: 10hz - 100khz (amplifier),
  • Active Crossover: 2.7khz
  • Active Crossover Slope: 12db per octave, phase linear
  • Cabinet Material: 18mm mdf cabinet, aluminium backpanel.
  • Available Finishes: Black, White, Graphite - follow the links at the side.
  • Inputs: 1 x goldplated RCA. Digital available by special order (we build in our own dac)
  • Weight: 4.6kg (9.2kg/pr)


Merovinger luDia

Can be used as 2.1 (€ 6.499) or 2.2 (€ 8.499) system




2 way

Amp: 2 x 200 Watt

Midrange 60 mm Aluminum

Tweeter: 30 mm silk dome

Size 1350 x 100 x 100 mm




Amp: 500 Watt

Woofer: 180 mm Aluminum long throw

Size (HxWxD): 500 x 200 x 300 mm